ComfortFLOW

Free draining antifatigue solution

Normal Wash Formula for Comfort Flow Mats

ComfortFLOW mats are fully launderable mats that perform great as anti-fatigue and flow-through mats in both wet and dry environments. They are ideal for Value Lease applications and do not require aggressive wash procedures or drying. ComfortFLOW mats can be washed periodically to remove oil, grease and soil. The formula shown below does not require extensive mechanical action. Its main purpose is to dissolve grease residue by using hot water to emulsify oils and grease.

Process

Comments    Time    Water Level    Temperature
1. Flush
Time: 2 - 3 Min.
Water Level: High
Temperature: 49ºC

2. Break (See #1 Below)
Time: 10 Min.
Water Level: High
Temperature: 69ºC

3. Rinse (Optional)
Time: 2 Min.
Temperature: 49ºC

5. Rinse
Time: 2 Min.
Water Level: High
Temperature: Cold

To prevent mat discoloration from dye cross staining, the following procedures should be followed:

1. Do not use high pH detergents, alkali or solvents. The break should not exceed a pH of 9.5. Use a low pH non-ionic detergent. 2-6 oz./100 # of mats. Consult with your chemical supplier for exact amounts.

2. Lay mats flat following removal from washer or dryer. If fabric top then lay mats nap side down following removal from the washer.This will allow any water in the mats to drain out. When dry roll mats nap out for delivery.
Should you require additional information or if Mountville can be of further assistance, please contact us, or call Advance on New Zealand 0508 238 262 or Australia 1800 51 52 53

Previous Page	Product Brochure
Product Description	CAD Drawings
Swatches	Technical Details
Back to Category	Maintenance