ClassicMAT

Classic dyed nylon for extra shine

ClassicMAT – Classic dyed nylon for extra shine

Normal Wash Formula - ClassicMats™

Proper laundering will prolong the service life of rental mats by preventing the buildup of soil and soap residue. Depending upon type and quantity of soil, it may be necessary to adjust the formula shown below to increase break time, temperature or number of rinses to achieve desired results.

Process

1. Flush
Time: 2 - 3 Min.
Water Level: Medium
Temperature: 49ºC

2. Flush (Optional)
Time: 2 - 3 Min.
Water Level: Medium
Temperature: 49ºC

3. Break (See #4 Below)
Time: 5 - 10 Min.
Water Level: High
Temperature: 49ºC

4. Rinse
Time: 2 Min.
Water Level: High
Temperature: Cold

5. Rinse
Time: 2 Min.
Water Level: High
Temperature: Cold

6. Extract (Low Speed)
Time: 1 - 2 Min.

7. Shake-Out (Rotate wheel at wash speed with drain open)
Time: 1 Min.

8. Extract (High Speed Max - 250 G's)
Time: 3 - 5 Min.

9. Dry (Optional)
Time: 5 - 10 Min.
Temperature: 180ºF (82ºC) Basket Temperature

10. Cool Down
Time: 5 Min.

To prevent mat discoloration from dye cross staining, the following procedures should be followed:
1. Launder dark mats separately from light colored mats.
2.  If mats are not separated into dark and light colors for washing, the maximum water temperature should be lowered to 38ºC.
3. Stained or heavily soiled mats can be washed at 60ºC. Repeated laundering at this temperature can cause premature color loss and increase dye transfer. For more information, see Tech Tip 102.
4. Do not use high pH detergents, alkali or solvents. The break should not exceed a pH of 9.5. Use a low pH non-ionic detergent. 2-4 oz./ 100# of mats. Consult with your chemical supplier for exact amounts. Tech Tip # 101 continued
5. Do not over dry mats.
6. If mats are not dried, the final rinse can be raised to 49ºC. This will reduce moisture retention following extraction.
7. Lay mats flat following removal from washer or dryer. Allow mats to cool before rolling. Roll mats nap out for delivery.

Should you require additional information or if Mountville can be of further assistance, please contact us, or call Advance on New Zealand 0508 238 262 or Australia 1800 51 52 53




 

Previous Page Product Brochure
Product Description CAD Drawings
Swatches Technical Details
Back to Category Maintenance